Start Vehicle Travelling Data Recorder
Model No.:CWSG50966
Description
There are three ways to charge the battery. The red indicator light will be illuminated during the charge. The whole process takes about 180 minutes. The red indicator light will then go out after the charge is completed.
1：Charge with the Power Supply Adapter
2：Charge with the PC-USB
3：Charge with the In-Car Power Supply
lInsert Memory Card
Following the direction silk-screened on the recorder, push the SD card straight into the slot until a click is heard.
Remove the card: push the TF card forward and the card will be popped out automatically.
lOverturn the LCD
The LCD can be overturned at an angle of 90 degrees backward..
Car Camera Structure
1）MODE key 2）Power Switch 3）OK key
4）Infrared Receiver Port 5）Speaker 6）MENU key
7）Camera Fill Light 8）Lens 9）AV-OUT
10）USB interface 11）TF Card Holder
Main Operations：
lSwitch between Video, Photo and Playback mode
Press MODE key to switch between Video, Photo and Playback mode
lSystem Setting
Press MENU key shortly to enter video output setting. The background of Video Output Setting column is blue at the moment. Press MENU key again shortly to switch to system setting. Now the column background of Setting column is blue. Press MENU key again shortly to exit.
lVideo
Press OK key to activate video recording function from standby and press OK key again to stop.
lPhotograph
Press OK key to activate photo taking function from standby.
lVideo/ Photograph Playback
1：Press MODE key shortly to switch to video playback mode.
2：Select the target file by moving MENU key upward to downward.
3：Press OK key to play or stop the playing of the file.
Contact us:
Email:sales@cto.hk
Address:Floor 8, Huguangtong BLD,Longgang Road,Longgang,Shenzhen, China
Telphone: +86-755-25608673