Car video camera
Model No.:CWSG50965
Description
Car video camera function operation:
1 start: There are two boot methods, turned off, press ON / OFF button, DVR recording mode and automatically start recording, then green light flashes; or in the off state to connect car charger, boot the machine directly into the video mode, green light flashes; unplug the car charger to save the video file after the machine automatically shut down.
TF card machine is not plugged in, turned on the LCD screen displays "card error"
2 off: in the boot state Click ON / OFF button, the machine shut down.
When the lithium battery is low, DVR screen shows the battery charge is low, and then save the file and automatically shut down.
3 Video: Boot directly into the video, the green light flashes, press the REC button to save the file and stop recording, green light, the machine into standby mode; point in standby mode Press the REC button to enter the video state machine, the green light flashes.
4 photographs: In standby mode, short press MODE key to the machine to enter the camera mode, press the REC button to take pictures, but you can hear the horn beep,
5. Playback and delete
In standby mode, short press MODE button twice to enter the playback mode, the machine, press the UP button or DOWN button to select the preview files, press the REC button to stop playback or other operations; If you want to delete the file, press the MENU button the delete menu, press the UP button or DOWN button to select "Run" or "give up", after pressing the REC button to confirm delete to exit the menu, return to playback mode.
6 infrared lights on
Camera automatically detects the external light intensity, if detected relatively dark environment, the machine automatically starts the infrared light, dark environment to facilitate the DVR records video
Normal conditions of light, infrared light automatically turns off to save power
Light detection is to take the camera around the average light value.
7 camera switching
In standby or recording mode, press the UP button to switch the point of working the camera, set the factory setting for the front and rear dual camera mode, press the UP key point to switch to the front camera work alone mode, press again to switch to the rear camera work alone mode, press again to switch to dual-mode cameras simultaneously
The following order cycle: dual cameras - a front camera - rear camera - Dual camera
Video mode switches the camera will save a video file on a.
8 screen rotation
In standby mode, press the DOWN key point of the upper and lower screen shows the direction of rotation to rotate the screen in different directions when you can stand the scene being observed
Car camera settings menu functions:
In standby mode, press the MENU button to enter the setup menu screen, press the UP button or DOWN button to select the setting item and press the REC button to set the function parameters into the interface to confirm, then press the UP button or DOWN button to select the specific parameters, press the REC button to confirm the setting is completed, press the MENU button to exit the setup menu
Contact us:
Email:sales@cto.hk
Address:Floor 8, Huguangtong BLD,Longgang Road,Longgang,Shenzhen, China
Telphone: +86-755-25608673