Pen Camera
Model No.:CWSG49111
Description
This ball-point pen is a high-definition video recorder with built-in memory. With simple operation, elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field.
Operating
1.Parts Description
a.1 Microphone and camera: Camera(1) is used to get the image signal;Microphone (2)
is used to get the sound signal.
a.2 Button(3) Press the button for the power,start recording, stop recording.
a.3 Indicator(4) blue light and red light are working stauts indicators.
a.4 Reset(5) If the video recorder stops responding, please use the suitable non-metallic tool to push the reset button.
a.5 Socket(6) The stand USB socket is used to connect with computer or charger. It is the interface for data transfer and charging.
2.ON/OFF
Press the button for 1 second to turn on the device. Then the blue indicator is on. In any status, press the button for 4 seconds, all lights will be turned off. The video recorder will automatically save the current file and shutdown.
3.Mode change
Press the button in different methods, the product will enters the different mode, The methods as follows: C.1 Photo mode—The photo mode indicator is blue light, When the device is on,the default mode is photo mode, the device enters into the standby status. Now the blue light is on. You can taking photo at any time; If the red light flash or keep on, it means that the device is in the video mode, need to press button 2 seconds and exit the video mode. C.2 Video mode—In the video mode, there are two status, the red indicator keep light on standby status and flash on recording status, To access this mode, you should press button 2 seconds to enter the mode, after release the button, the blue light is off, the red light keeps light. To exit from the video mode, you can press the button for 2 seconds.
4.Take photo
In the photo-taking mode, the device enters into the standby status for photo-taking. Now the blue light is on. Press the button. The red light flashes one time to complete the photo taking and image saving. Then it returns to the standby status. This mode is 3 pieces continuous shooting.
Note—Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.
5.Record video
In the video mode, the device enters into the standby status.Now the red light is on. Press the button for short time to start the video recording. The red light flashes slowly. Pressing the button for short time again to stop recording and save the file. Afterward the red light returns to ON mode; In order to ensure the safety and the size of the file, the system will automatically save file every 50 minutes once, and continue the video recording.
Note—In order to ensure good sound effect of recording, do not block the microphone hole. The other operation notes are as same as Point d.
Contact us:
Email:sales@cto.hk
Address:Floor 8, Huguangtong BLD,Longgang Road,Longgang,Shenzhen, China
Telphone: +86-755-25608673