English
Product Detailed Description
1、Battery installation method: switch on the rear cover, the 18650 battery positive upward into the Tong Shen, twisted on the back cover (put batteries attention to the battery positive and negative.
2、Lighting mode switching method:
1) The flashlight is turned on 30% brightness, suitable for search and rescue targets within 100 meters. Touch dimmer switch to achieve both models for 10% brightness. 2) 10% of the brightness of the lighting for 10 meters, once again touch switch to 100% brightness. 3) 100% brightness for 500 meters of target search, once again touch switches 10HZ explosive flash. 4) 10HZ explosive flash for emergency warning capabilities. Re-touch switch for SOS distress signal. 5) SOS signals suitable for communications in the event of an emergency interruption of the circumstances. 6) The torch lock mode: suitable for a long time when not in use, the torch placed in a locked mode, prevent accidental switching. The torch back cover anti-clockwise twist 1-2 circle is complete.
3, charging method: To ensure you are able to properly charge, charge before you check the torch is working properly, to work properly can be charged. Figure 3
1）Counterclockwise rotation grip, exposed charging jacks
2) will be dedicated charger 2 pin end into a 220V outlet, the other end into the flashlight charger charging jack, open the torch switch. (The above charging indicator light shows when the charger is red, when the light changed from red to green, indicating charge complete) 18650 battery charge time of 3 hours
3）Charging is complete, unplug the charger plug, clockwise rotation grip, tighten connecting thread, you can use。
Battery Caution
1, the flashlight battery 18650X2 together with a shield battery charger using the first wife of their charge. This product can also use the four non-rechargeable CR123A batteries or 4 16340 lithium battery, charger first wife 18650X2 only one battery charge with the shield, the other prohibiting the use of other battery!
2, lithium batteries Features: Li-ion battery and cell phone battery charging two totally different ways; Li-ion battery without memory, you can always use at any time charge.
3, the natural discharge rate lithium batteries when not in use every day at around the release of its Charge of 1% or less; suggested a long time do not use battery power should be filled with preserved, normal in about three months and then charge and discharge一次.
4, pay attention to the battery waterproof, moisture-proof, drop resistance, etc.;
5, warranty Note: after leaving the factory will not warranty the battery range.
Flashlight Caution
1, torch in use, in accordance with torches and battery voltage requirements of choice, not to abuse, to prevent burn circuit boards, different models, different voltage of battery at the same time do not use; please note correct choice of battery cells.
2,, Do not torch a long time with the sun, water, chemicals and corrosive gases such as contacts, to avoid damage to torch the surface oxide layer.
If you want to make custom long-range light flashlight with your logo,slogan,telephone,website,email , please send us your design or give us instructions about your imprint.We'll send a free virtual art proof for your approval,you can ask a real sample with logo before production too.
Our long-range light flashlight is popular as promotional,advertising, business,corporate gifts.
Didn't have a good gifts idea yet? We also have a team can give you suggestion, all of them have more than 8 year experience in gifts market, familar with promotions,events,trade show,conferences etc. If you have any question , just click the Enquiry below to send us messages.
Customer Comments
Question & Answers
Imprint Colors
Standard Silk-Screen ColorsSET UP CHARGE
$40.00(G) per color, per side. $25.00(G) on re-orders.
Multi-color Imprint
Add .20(G) per extra color, per side, per piece. (2 Color Maximum) Second Side Imprint: Add .20(G) per color, per piece.
You can send CWSGift your logo or give us instructions about your imprint by simply replying to the enquriy or quotation email.
You should receive a free virtual art proof for your approval before production.
You can ask a real sample with logo before production too
Imprint Artwork
We accept high-quality laser prints, or digital art on CDs or by e-mail. For faster serviceand better imprint quality, we recommend providing artwork via e-mail. Artwork shouldnot need any additional touch-up, design, color separation or rearranging for use.
The use of licensed artwork requires a written release. Artwork when submitted isassumed to be in full compliance with laws governing copyrights, trademarks, etc.We are not responsible for typographical errors incorporated into submitted artwork.Factory reserves the right to make slight alterations in copy and logos to adapt to imprinting processes.
Please Note: CWSGift reserves the right not to print any logo or message that isdeemed inappropriate.
QR Codes: QR codes are most readable when printed on flat surfaces using a highcontrastimprint [such as a white imprint on dark surfaces or a black imprint on lightsurfaces]. QR codes may not be readable when printed on coarse-weave materials orcurved surfaces. For the best results, the QR code should be black with a white border.A pre-production proof is recommended to test the functionality of the code.CWSGift is not responsible for the quality, accuracy or usefulness of QR codeoperations or content. CWSGift does not police or endorse any QR code content.
Electronic Artwork
Artwork will be accepted digitally from the following programs:- Adobe Illustrator® (all fonts converted to outlines)—preferred format
- Photoshop® (black-and-white .tiff, .pict, .jpeg files scanned or created at 1200 DPI[high resolution] and at approximately the actual size of the imprint area)
- FreeHand® (saved as an Adobe Illustrator® ".ai" format, Mac or PC)
- InDesign® files must be sent with the linked file. A linked file may include .eps, .pict,.tiff or .jpeg file formats
- CorelDraw® (Use Publish PDF)
Vector Art
We recommend using vector art because it produces the highest quality artwork.It is "resolution independent," which means it can be enlarged without affecting the quality of your imprint.
Hard-Copy Artwork
If electronic art is not available, please provide sharp, high-contrast, color-separated or black-and-white artwork. Artwork will be returned upon request or it will be discarded.
E-mail Artwork
Artwork should be submitted within 24 hours of sending the order.Please include purchase order number in the subject line of the e-mail. Multiple files should be compressed in .zip or .rar format. File size limitation via e-mail is 10MB.
One year Product Guarantee.
CWSGift will honor its return policy for any product that it determines does not meet its standards for quality and workmanship.
CWSGift are committed to working with our vendors and employees to incorporate environmentally friendly business practices into our daily operations. These measures benefit our local communities, states and society at large.
We will continue to identify and act on opportunities to minimize our impact on the environment.
Pre Order Processing: 3 days
Production 20 days (begins after art prep, proof approval)
Shipping by Express 3 to 6 days
by sea 20 to 30 days
Packaging:Bulk packed or according to your requirement,Special packaging may incur additional production time.
Production Terms & Conditions
Production does not begin until ALL the following requirements have been met:
- Order Approval
- Proof Approval
- Deposit Payment
