Four Bluetooth speaker flashlight Mobile Power

Product Detailed Description

Operating Instructions
                                                                                                                                                                 Power Switch: Slide the power switch button to the ON / OFF position to finish off operation .
Power indicator:
1 Insert the charger or computer USB charging cable :
  A ) is not fully charged , the four power indicator blinks to indicate charging status cycle .
  2 ) When the battery is fully charged , four power indicator light long .
(2) Low voltage : 3.60V when the power is less than the last one power LED flash . Less than 3.45V at shutdown.
3 If you turn on the power switch, the device can not start , please charge . When the battery voltage reaches the standard boot , the device will automatically boot , by pressing any key , when the Bluetooth indicator light to indicate the machine is started.
4 at no charge state, the power indicator light 5 seconds , and then burn out, press any key to power indicator light. 5 hibernation, when Bluetooth is not connected or the connected Bluetooth but not on a call or when playing music , and the device will automatically enter power-saving mode when there is an incoming call or Bluetooth music playback , press any key to wake up the back to even .
Bluetooth indicator :
1 Not connected : red and blue lights flash alternately . 5 seconds after the lamp is off , press any key Bluetooth indicator light.
(2) has been connected : long bright blue light , red light off .
Key Description :
1 Flashlight Key : Turned on by a short press flashlight key flashlight switch to achieve .
(2) Volume up / down key: press the volume up / down . Short press for the conversion on / next song .
3 Pause / Play button: call or not call state, as the pause / play button. In the state of an incoming call or a call when :
  A ) call : Short press to answer , press Drop.
  2 ) call, short press hang up , press invalid.
Note : As a mobile phone are connected to the device, you must first ignore the preceding paired device to connect again before re- pairing ( as a result of a single device name each machine ID is different )
                                                                               Electrical parameters: 2000 mA rechargeable lithium battery capacity ring[Page]
         Power : 1.0W
         Frequency response : 100HZ-20KHZ
         SNR : ≥ 75db
         MicUSB Input : 5V/800MA
         External charger USB output : 5V/1A
         Speaker : 1W/8Ω Diameter : 30mm
         Stereo Bluetooth music player receiving distance 10 m ( accessibility ) Note: 1 ) This product can not put it in high temperature , while away from open flame .
          2 ) This item can not be placed in the water , this product can not accept external pressure .
          3 ) After the power is fully charged, remove the charger must not be long for this device charging.
          4 ) If the charge , the product still does not work , please contact the supplier on the box call