Electric Planner with 2 Carbon Brushes

Product Detailed Description

Electric Planner with 2 Carbon Brushes

The tool that flattens rough stock before a finish goes on earns its place on the bench. This electric planer runs on 230V/50Hz with 610W behind it, and the cutter turns at 16,000rpm with no load, so boards come down to size without stalling on light passes.

Planing width: 82mm

Planing depth: 0-2.5mm

The depth range lets a worker take a thin shaving first to check grain direction, then step up for faster removal once the board behaves. A clean cut leaves fewer sanding marks and less waste on edge work, shelf trim and door fitting.

Each unit ships with wear items that get used first: With 2 carbon brush, 1 belt, 1 blade. Keeping spares in the case means a brush change does not stop a job.

Compliance paperwork matters to trade buyers, and the tool carries GS/CE/EMC/RoHS approval. Packaging is a single color box, which is straightforward to stack and label for pallet shipment.

• GS/CE/EMC/RoHS approval
• Voltage frequency: 230V/50Hz
• Power: 610W
• No load speed: 16,000rpm

Confirm the plug type and voltage for the destination market when placing a stock order, and check the carton count against your handling setup.

Package: color box