Expandable Padded Rolling Snowboard Bag 155-185cm

Product Detailed Description

A snowboard bag built as a long flat sleeve, with a wheeled tail and a padded shell shaped to hold a deck with bindings mounted. The outer shell is polyester fabric with a coated backing, cut in panels and joined by stitched seams running the length of the body. An expansion section lengthens the sleeve so it takes a park board or a longer freeride deck. You lay it face down, open the main zip, slide the board in edge first, then lift it by the handle or roll it on the base wheels. It sits in airport queues, train aisles and resort lockers, moving between transport and slope.

• Foam padding runs along the board cavity so the deck rests against soft panels instead of bare fabric
• Main zip runs the full length of the top edge, so the flap folds back clear of the cavity when packing
• Front zipper pockets sit flat against the panel, sized for gloves, goggles and wax so small gear travels outside the board sleeve
• Integrated wheels at the tail sit behind a rigid base panel, so you tip the bag and roll it through a terminal
• Padded grab handle is stitched across the front panel, so you can lift the bag onto a rack or bench