3D Active Glass

Product Detailed Description

Technical Parameter

1.      Working voltage: 3V

2.      Working time: about 80 hours

3.      Environment temperature: -10-65 °C

4.      Frequency: 120-240HZ

5.      Working current: 4mA

6.      Standby current: 0.6 mA

7.      LED response time: 1.5ms

8.      Contrast: 1000:1

9.      Battery: Button cell CR2032(230mAH)

10.  synchronic control signal: infrared ray

11.  operating principle: High speed liquid crystal light value

12.  Weight: 45g(including battery)

Product Features

1. Design

a. High tech design concept,

b. Ergonomic physical design,

c. wear comfortable

d. fashion appearance,

e. A certain depth of glass frame to satisfy those people who wear a pair of glass.

2. Adopt comfortable nosepiece, which made of silica gel, prevents leaving any marks on the nose bridge. Equipped with a big and a small nose pad, fitting for all the people.

3. Flexible earpieces, suitable for everybody.

4. Frame material: environmental plastic ABS+ PC

5. Earpieces material: PE material, wearing softness and comfortable.

6.      Adopt imported CPU, low power dissipation, stable performance.

7. High penetration rate to make sure ideal image. Uneasy to feel tired with 1.5s of response time.

7.      The system will turn to standby mode automatically if not receive sync signal.

 Direction for use:

1. Turn on: press the button of power for 3s until the blue light flashing.

2. Turn off: press the button of power for 3s until the blue light turn off.

3. Have signal condition: the blue light flashing 1 time in every 3s.

4. No signal condition: the blue light flashing 1 time in 1s.

Note: please do not cover the receiver of glass when in use

Accessories:

1.      3D active glass

2.      2 CR2032 button cells

3.      2 nosepiece

4.      1 glass pocket

5.      1 color packing box.

6.      1 instructions