9.0mm mSATA SSD to 2.5inch HDD Converter Adapter Case

Product Detailed Description

The aluminum enclosure is a shallow tray-and-lid assembly that carries a compact board-format storage module into a standard internal drive bay. The base tray holds the module flat against its inner shelf, aligning the board edge connector with a keyed slot at one end, and a thin top cover clamps over it with screws into corner bosses. A technician slides the populated case into the bay, seats it against the mounting frame, and tightens the screws. The brushed silver shell stays flush with the bay surround, clearing adjacent components in tight internal layouts.

• Aluminum tray and thin cover enclose the module top and bottom, shielding exposed circuitry from contact inside a populated drive bay
• Screw bosses at each corner anchor the cover so the board edge connector stays fully seated against the slot wall
• Brushed silver outer face stays flush with the bay surround, clearing adjacent components in tight internal layouts
• A single keyed edge slot aligns the compact board connector so a technician swaps modules without soldering
• Shallow tray profile nests into standard bays sized for full-width platter drives, adding storage without a new bay